Guide overlay
3D Printing Neurons with Graphene: Stretching the Possibilities at Northwestern University
Posted by 3DP4E

By Andrew Wheeler | 3D Printing Industry

Recently, 3D Printing Industry reported on Michigan Tech’s Tolou Shokuhfarexperimenting with graphene-based biomaterials to produce a “bioink” that can replace and re-stimulate growth in cartilage and nerve cells. Graphene has long been a material of interest for biomedical, engineering, and electrical researchers due to its ultra-strong and lightweight structure, its ability to store energy, and its electrical conductivity.

Now, another team at Northwestern University has begun printing three-dimensional structures with graphene nanoflakes. The team, led by Assistant Professor of Materials Science and Engineering at the McCormick School of Engineering and Surgery at the Feinberg School of Medicine, Ramille Shah, and her postdoctoral fellow, Adam Jakus, has developed a new kind of graphene ink that can be used to print large 3D structures.

Shah says, “People have tried to print graphene before, but it’s been a mostly polymer composite with graphene making up less than 20 percent of the volume.” She finds that using graphene ink on a smaller scale actually decreases many of the material’s most esteemed properties. Mixing in higher volumes of graphene flakes into the ink results in fragile structures that are difficult to manipulate. Shah’s ink uses sixty to seventy percent graphene, preserving the integrity of the material, including its electrical conductivity. The secret ingredient in Shah’s ink is a mix of biocompatible elastomer and fast evaporating solvents.

Shah explains, “It’s a liquid ink. After the ink is extruded, one of the solvents in the system evaporates right away, causing the structure to solidify nearly instantly. The presence of the other solvents and the interaction with the specific polymer binder chosen also has a significant contribution to its resulting flexibility and properties. Because it holds its shape, we are able to build larger, well-defined objects.”

Shah and Jakus’s research is described in a recent paper in the April 2015 issue of ACS Nano, called “Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications” written by Jakus and another Materials Science and Engineering professor, Mark Hersam. On the cover of the issue, ACS Nano features the team’s 3D printed graphene scaffold, which Shah believes could one day play a significant role in regenerative medicine and tissue engineering (like Michigan Tech’s cartilage and nerve cell research). In fact, her team has already run some tests populating one of the scaffolds with stem cells.

In the experiment, the cells not only survived, but they divided, multiplied, and transformed into neuron-like cells. Shah explains, “That’s without any additional growth factors or signaling that people usually have to use to induce differentiation into neuron-like cells. If we could just use a material without needing to incorporate other more expensive or complex agents, that would be ideal.”

The Northwestern team also points out that the graphene’s electrical conductivity and biocompatible elastomer combination also allows for structures that are flexible and strong enough to be sutured to existing tissues. Shah posits that the material could one day be used for medical implants or biodegradable sensors. “Cells conduct electricity inherently — especially neurons,” she says. “So, if they’re on a substrate that can help conduct that signal, they’re able to communicate over wider distances.”

This particular graphene-based ink is just one of 30 printable bioinks that Shah has formulated with her graduate team. All of these inks are compatible with tissues and organs, and all of them could potentially be used as ground zero for printing more complex organs. Shah says, “There are many different tissue types, so we need many types of inks. We’ve expanded that biomaterial tool box to be able to optimize more mimetic engineered tissue constructs using 3-D printing.”


Please login to post a comment.

A3a98d385e7d49dadf31fd74ec44307a76add67e thumb
Posted on October 1, 2014

By Scott J Grunewald | 3D Printing Industry

60ccc87cc14b6eaf65b4e801ff93b7b874f745b3 thumb
Posted on December 9, 2014

By Jelmer Luimstra | 3D Printing