By Eddie Krassenstein | 3DPrint
3D printing is fascinating, especially to those individuals who have not ever seen the technology in action previously. However, like with all new technology, this fascination subsides as time goes on and the technology becomes more commonplace. Perhaps we aren’t quite at this point yet with 3D printing, but the intrigue generated through the seeing, touching, and feeling of 3D printed objects will surely wither with time. One man in New Zealand, named Don Clucas, realizes this, and with the help of the University of Canterbury, he has come up with a way to fascinate even those already acclimated to 3D printing technology.
In a project that could be considered “breathtaking,” “innovative,” and “potentially revolutionary,” Clucas has created what he believes is the first ever fully 3D printed working engine. Better yet, it runs on thermodynamics, meaning all it requires for fuel is simple tap water.
“What I’m doing is creating projects for people to print, rather than objects,” explained Clucas to 3DPrint.com. “A few years ago, 3D printing was new [and] people were wowed by items that could be made. Now with wide distribution of low cost machines it has become less spectacular. I have observed the attention span of visitors to our 3D lab, looking at printed parts. [Viewing of] static objects are generally several to tens of seconds. Watching the printer running can be up to a minute, but watching and explaining these engines can be minutes. People like seeing dynamic things.”
hese Stirling cycle engines are certainly dynamic, and without a doubt have the ability to keep anyone’s attention for more than a few seconds. For those unfamiliar with how Stirling cycle engines operate, they run off of heated and cooled air or other gases. The heated and then cooled gases cause a pressure change, which in turn push and pull on the engine’s piston. To run these engines, all it takes is a bowl of hot water underneath, some ice water on top, and a small flick of the flywheel to get it started. Once complete, the engine will begin running using the hot and cold water as a way to control the air pressure.
Clucas has created all of the design files and has made them available on his website, along with instructions on assembling these engines.
There are many things that you can do with these engines,” explained Clucas. “You can use them for yourself, or they can be used as educational instruments. For example, at a high school you could make the machines, and demonstrate them to the students to show them basic thermodynamics. If you got them in universities, you can have labs set up so that the students can actually run them, do tests on them, do examinations, and do development and optimization of the machines.”
The way in which these engines are designed means that the variables in how the engine operates can be modified. Many different setups can be created, as well as different methods of operation. The stroke of the engines may be changed, as can the phase angle of the pistons, allowing for complete customization.
Some of the great benefits of these 3D printed thermodynamic engines are that they run clean, are completely environmentally friendly, run on hot and cold water, and run almost completely silent. Best of all, the files are completely free to download, and just about anyone with access to a 3D printer can create one.
As for Clucas, he isn’t stopping here. He is constantly working to bring new 3D printable projects to those interested in this technology. “I want to develop projects for people with a printer and little or no access to a tool shop or special technical abilities,” he tells us. “There are many published projects that are great but require special extra bits, machined parts or electronics. These projects are particularly suited to education.”
Please login to save this item to your profile.